0

Engine Kits & Rotating Assemblies

What bore, stroke and compression should your engine end up with? In this category we bring together engine kits and complete rotating assemblies with crankshaft, connecting rods and pistons that need to match. The kits are for you if you are rebuilding a worn engine or want to increase displacement in a project with more power.

What do engine kits and rotating assemblies include?

A rotating assembly typically consists of a crankshaft, connecting rods and pistons. An engine rebuild kit, on the other hand, usually combines wear parts and gaskets for a major overhaul. The contents depend on the specific kit, so check the product description. One example is Eagle's rotating assembly for the Chrysler 440 with H-beam connecting rods and dish-top pistons. With a stroker kit, the engine gets a longer stroke and therefore greater displacement. One example is Manley's Stroker Series piston kit for the Chrysler 6.4L Hemi.

How to choose the right kit

Choose based on several factors combined, not just the largest displacement:

  • Bore and stroke: must suit the block, the crankcase and the displacement you are aiming for.
  • Compression: the piston dish, e.g. -12 cc or -20.5 cc, affects the compression ratio together with the cylinder head and gasket.
  • Power target and boost: high boost or high revs can require stronger connecting rods and pistons. It depends on the engine and application.
  • Balance: if your engine has balance shafts, you will find parts for them under balance shaft kits.

Installation and accessories

Installation typically requires measuring bearing clearance, ring gap and piston clearance, and the cylinders may need to be bored or honed for the new pistons. It pays to replace bolts and gaskets at the same time. Additional parts such as bearings and pistons and piston rings are found in the sister categories. Follow the manufacturer's instructions for break-in and the first oil change. Brands in the category also include Athena, ARP and Victor Reinz.

Frequently asked questions

What is the difference between a rebuild kit and a rotating assembly?

A rebuild kit typically combines wear parts and gaskets for rebuilding the engine. A rotating assembly typically includes a crankshaft, connecting rods and pistons, often with altered dimensions. What is included depends on the specific kit.

Does a stroker kit require machining of the engine?

It depends on the kit and the block. A longer stroke can require extra clearance in the block, and new pistons can require boring or honing of the cylinders. Check the dimensions and installation instructions before you order.

Does an engine with larger displacement need to be approved for road use?

It depends on the product and the car. A change in displacement or power can require registration and inspection. Check the requirements and any documentation for the specific part number and your car before the engine is used on the road.

Why is the piston dish important?

The dish in the piston crown is specified in cc. It affects the compression ratio together with the cylinder head, gasket thickness and stroke. Incorrect compression can cause knocking, especially at high boost, so calculate the ratio based on the entire engine.

View as Grid List
Sort by
Display per page

MITSU 85mm/1.375 CD/DISH

man606000C-1
Manley 03-06 Evo 8/9 (7 Bolt 4G63T) 85mm STD Bore 8.5:1 Dish Piston (Single)
220,63 € excl. VAT

MITSU 85mm/1.375 CD/DISH E/D

man606000CE-4
Manley 03-06 Evo 8/9 (7 Bolt 4G63T) 85mm STD Bore 8.5:1 Dish Extreme Duty Pistons w/ Rings
1.023,43 € excl. VAT

MITSU 85mm/1.375 CD/DISH E/D

man605100CE-4
Manley 90-94 Eclipse (6 Bolt 4G63T) 85mm STD Bore 9.0:1 Dish Piston Set w/ Rings Extreme Duty - JNZ
1.021,13 € excl. VAT

MITSU 85mm/1.375 CD/DISH E/D

man606100CE-4
Manley Mitsubishi 2.0L 4G63 Piston Set - 85.00mm Bore 1.375in CH, -8.00 CC
1.023,43 € excl. VAT

MITSU 85mm/1.375 CD/DISH E/D

man605000CE-4
Manley 90-94 Eclipse (6 Bolt 4G63T) 85mm STD Bore 8.5:1 Dish Piston Set w/ Rings ED
1.023,43 € excl. VAT

MITSU 85mm/1.375 CD/DISH T/T

man617100CE-4
Manley Mitsubishi Eclipse GST/GSX-Eagle 85mm Bore 88mm Stroke -12cc Dome Volume Piston Set of 4
1.228,26 € excl. VAT

MITSU 85mm/1.375 CD/DISH T/T

man606300CE-4
Manley Mitsubishi Evo VIII/IX 4G63/4G63T 85mm Bore 8.5:1 Comp Ratio -12.1.0cc Dish T/T Piston Set
1.230,56 € excl. VAT

MITSU 85mm/1.375 CD/FLAT TOP

man606200C-4
Manley 03-06 Evo 8/9 4G63T/4G63 85mm Std Size Bore 10.0/10.5:1 Flat Top Pistons w/ Rings
871,97 € excl. VAT

MITSU 85mm/1.375 CD/FLAT TOP T/T

man606400CE-4
Manley Mitsubishi 4G63/4G63T EVO VIII/IX 85mmSTD -2.5cc Dish Platinum Lightweight Piston Set w/Rings
1.230,56 € excl. VAT

MITSU 86.5mm/1.012 CD/DISH

man619015CE-4
Manley 03-06 EVO VIII/IX 86.5mm Bore +1.5mm OS 8.5/9.0 CR Dish (Extreme Duty) Pistons W/Rings - 4
1.023,43 € excl. VAT

MITSU 86.5mm/1.012 CD/DISH

man619015C-4
Manley 03-06 EVO VIII/IX 86.5mm Bore-+1.5mm Over Size-8.5/9.0 CR Dish Piston Set with Rings
868,17 € excl. VAT

MITSU 86.5mm/1.012 CD/DISH

man619215C-4
Manley 03-06 EVO VIII/IX 86.5mm-Bore +1.5mm Over Size-10.0/10.5 CR Dish Piston Set with Rings
871,97 € excl. VAT

MITSU 86.5mm/1.012 CD/DISH E/D

man619215CE-4
Manley 03-06 Mitsubishi Evo 8/9 4G63T 86.5mm +1.5mm -8cc Dome 94mm Stroke Pistons w/ Rings
1.023,43 € excl. VAT

MITSU 86.5mm/1.130 CD/DISH

man608015C-1
Manley 03-06 Evo 8/9 4G63T 86.5mm +1.5mm Over Bore 100mm Stroker 8.5:1 Dish Piston - SINGLE
220,63 € excl. VAT

MITSU 86.5mm/1.130 CD/DISH

man608015C-4
Manley 03-06 Evo 8/9 4G63T 86.5mm +1.5mm Over Bore 100mm Stroker 8.5:1 Dish Pistons w/ Rings
871,97 € excl. VAT

MITSU 86.5mm/1.130 CD/DISH

man617015C-4
Manley 03-06 Mitsubishi Evo 8/9 4G63T 86.5mm +1.5mm 8.5.0/9:1 Dish 100mm Stroke Pistons w/ Rings
871,97 € excl. VAT

MITSU 86.5mm/1.130 CD/DISH E/D

man617015CE-4
Manley 03-06 Mitsubishi Evo 8/9 4G63T 86.5mm +1.5mm -8cc Dome 94mm Stroke Pistons w/ Rings
1.023,43 € excl. VAT

MITSU 86.5mm/1.130 CD/DISH E/D

man608015CE-4
Manley 03-06 Evo 8/9 4G63T 86.5mm +1.5mm OverBore 100mm Stroker 8.5:1 Dish Pistons w/ Rings and Pins
1.023,43 € excl. VAT

MITSU 86.5mm/1.155 CD/DISH

man624005C-4
Manley 08+ Mitsubishi Evo X (4B11T) 94mm Stroker 86.5mm +0.5mm Bore 9.0:1 Dish Piston Set with Rings
871,97 € excl. VAT

MITSU 86.5mm/1.155 CD/DISH

man624105C-4
Manley Mitsubishi 2.0L 4B11T Piston Set - 86.50mm Bore 1.155in CH, -3.50 CC
871,97 € excl. VAT

MITSU 86.5mm/1.155 CD/DISH

man624005C-1
Manley 08+ Mitsubishi Evo X (4B11T) 94mm Stroker 86.5mm +0.5mm Bore 9.0:1 Piston with Rings - Single
231,47 € excl. VAT

MITSU 86.5mm/1.155 CD/DISH E/D

man624005CE-4
Manley 08-15 Mitsubishi Lancer EVO 86.5mm Bore -11cc Dome Extreme Duty Piston Set
1.023,43 € excl. VAT

MITSU 86.5mm/1.155 CD/DISH T/T E/D

man624305CE-4
Manley Mitsubishi 4B11 86.5mm Bore 10.0:1 CR -3.5cc Dish Turbo Tuff Piston Set w/ Rings
1.230,56 € excl. VAT

MITSU 86.5mm/1.248 CD/DISH

man618215C-4
Manley 03-06 Evo VII/IX 4G63T 86.5mm +1.5mm Oversize Bore 10.0/10.5:1 Dish Piston Set with Rings
871,97 € excl. VAT